Description
Ditel Junior-D and Junior20-D Digital Panel Meter for the following input signals: High voltage (10 to 600V AC), TTL/24V Encoder, Contact switch, Sensors: Magnetic, Namur, NPN and PNP.
Junior-D (JR-D) and Junio20-D (JR20-D) models accept most commonly used pulse generators or transducers to work as an unidirectional counter, tachometer or frequency meter (rpm or rate). They have configurable factors and offset when they are programmed as a counter or easily scalables into desired engineering units working as a tachometer or frequency meter.
Universal AC/DC voltage supply. It is fully configurable through 3 front keys, which allows signal input type selection and also provides 8V or 24V DC up to 60mA or 30mA load current output respectively for sensor excitation.
- 4 digit indicator with 14mm digit height and 9999 to 9999 display range for JR-D
- 4 digit indicator with 20mm digit and 1999 to 9999 display range for JR20-D
- Configurable decimal points for JR-D and JR20-D
Has two LED’s for set point status indication (if output 2RE option card is installed). 2RE option activates two alarms depending on display programmed values, though not from totaliser which this is only an informative reading.
Configured as a counter has a totaliser (up to 999999) and a RESET function, available through frontal key or remotely. Besides current counting display, the totaliser brings the possibility of visualising the cumulative number (divided in two parts) of pulses produced in multiple processes. Remote RESET is activated through contact switch present at input rear connector. When configured as a frequency meter or tachometer it is also possible to adjust internal sampling time and time limit, thus providing specific application adaptation.
Detection, saving, later recalling and resetting of maximum and minimum values reached by display since last reset activation (functions not available for counter mode).
Ditel Junior-D and Junior20-D series Digital Panel Meters is a simple, economic display for modern industrial applications. The ease of programming and broad range of applications of the Junior series makes it a smart choice for any industry segment.
DITEL has the widest range of Digital Panel Meters for the monitoring and control of industrial processes. DITEL has also a very complete range of Large Displays that offer a high number of possibilities in terms of visualisation and communication:
Several heights of digits allowing long viewing distances, most common communication protocols available, adaptability to many kind of environmental conditions, numeric and alphanumeric contents,..etc. All these with a view to help your company improving such important matters as productivity, Focus on goals and objectives, Results achievements, Security, etc…
Since its creation in 1984 DITEL has concentrated on the development and manufacture of digital instruments that integrate systematically the highest technology while increasing continuously their flexibility and adaptability to virtually all industrial and service applications. This resolutely innovative approach, reinforced by a solid international network, is positioning DITEL as one of the favourite partner for the industry around the world.
Follow us on Facebook
