Ditel KOS203PA Converter in-head Transmitter with 2-wire 4-20mA output (PASSIVE), for 2-3-4 wire Pt100, Pt10000 and Ni100 Sensors for temperature measurement in industrial env...
Ditel KOS203PA Converter in-head Transmitter with 2-wire 4-20mA output (PASSIVE), for 2-3-4 wire Pt100, Pt10000 and Ni100 Sensors for temperature…
Ditel KOS206A Isolator with 2-wire 4-20mA output (PASSIVE), for Thermocouples (J, K, S, R, T, E, N, B), 2-3-4 wire RTD (Pt100, Ni100) and mV sensors for temperature measuremen...
Ditel KOS206A Isolator with 2-wire 4-20mA output (PASSIVE), for Thermocouples (J, K, S, R, T, E, N, B), 2-3-4 wire…
Ditel KOS517A Universal 2-way isolator for DC voltages or current signals. It admits inputs from mV to high VDC voltages with ± values, as well as current 0/4 - 20mA able to ...
Ditel KOS517A Universal 2-way isolator for DC voltages or current signals. It admits inputs from mV to high VDC voltages…
The Ditel KOS526 Passive Isolator has an input 0/4-20mA (Sink) and an output 0/4-20mA (Source). Comes with a 2 ways 1,5 kV Isolation and is loop powered.
Ditel KOS528A Loop isolator for DIN rail. It has an input and output of 4-20mA (Sink). 2 way 3kV isolation…
Ditel KOS528A-DUAL Double loop isolator for DIN Rail. Has two input and output 4-20mA (sink) with 2-way isolation 2kV or Isolation between ch1 an ch2 3.5kV. Loop powered.
&...
The Ditel KOS538 Loop Isolator for DIN Rail. Has an input: 4-20mA and an output: 4-20mA. Isolation: 3 ways 2.5…
Ditel KOS538A Isolator for active /passive sensors. They are loop isolators for DIN rail. It has an input 0/4-20mA (source/sink) and output 0/4-20mA (source). 3-way isolation ...
Ditel KOS538A Isolator for active /passive sensors. They are loop isolators for DIN rail. It has an input 0/4-20mA (source/sink)…
Ditel KOS538A-DUAL double loop Isolator for DIN rail. It has two input 0/4-20mA (Source/sink) and two output 0/4-20mA (Source). Isolation 3 ways 3kV / 3.5 kV between ch1 and c...
Ditel KOS538A-DUAL double loop Isolator for DIN rail. It has two input 0/4-20mA (Source/sink) and two output 0/4-20mA (Source). Isolation…
The Ditel KOS539 Configurable Signal Converter has an input 0-10V; 0/4-20mA and a configurable outputs in 0-10V or 0 / 4-20mA. 3 ways isolation 2.5kV and a power supply 24 VAC...
Ditel KOS 568 Passive Isolator. Has an input 4-20mA (Sink) and an output 4-20mA (Source). 3 ways 1,5 kV Isolation.…
Ditel KOS817A Temperature Converter for Pt100. Converts the temperature captured by a 2 or 3 wire Pt100 sensor, into a proportional voltage and current output signal (Active/P...
Ditel KOS817A Temperature Converter for Pt100. Converts the temperature captured by a 2 or 3 wire Pt100 sensor, into a…
Ditel KOS819 Temperature Converter for DIN Rail. Has an input: Pt100 (2 or 3 wires) and an output: 0-10V; 0/4-20 mA. Isolation: 2 ways, 2.5 kV. Power Supply: 24V AC/DC.
&nb...
Ditel KOS819 Temperature Converter for DIN Rail. Has an input: Pt100 (2 or 3 wires) and an output: 0-10V; 0/4-20…
Ditel KOS819A Transmitter with 4-20mA output for 2-3-4 wire Pt100, Pt1000 and Ni100 sensors, for temperature measurement in industrial environments with excellent EMC characte...
Ditel KOS819B Converter of temperature captured by a 2 or 3 wire Pt 100 sensor, into a proportional voltage output…
Ditel KOS839 Temperature Converter for DIN Rail. Has an input: Thermocouple J,K and an output: 0-10V; 0-4-20mA. Isolation: 2 ways 2.5 kV. Power Supply: 24V AC/DC.
Ditel KOS839 Temperature Converter for DIN Rail. Has an input: Thermocouple J,K and an output: 0-10V; 0-4-20mA. Isolation: 2 ways…
Ditel KOSETH/RS4 Isolator converter / Gateway from RS485 to Ethernet. The KOSETH/RS4 module allows the connection of equipment with RS485 to ethernet networks. By RS485 we can...
Ditel KOSETH/RS4 Isolator converter / Gateway from RS485 to Ethernet. The KOSETH/RS4 module allows the connection of equipment with RS485…
Ditel KOSMUX16 Analog Multiplexer for 16 0/4-20 mA inputs and one active 0/4-20mA output controlled by 4 digital inputs with a maximum multiplexing speed of 7ms per channel.
...
Ditel KOSMUX16 Analog Multiplexer for 16 0/4-20 mA inputs and one active 0/4-20mA output controlled by 4 digital inputs with…
Ditel KOSMUX16A Analog Multiplexer for 16 0/4-20mA inputs and one RS485 MODBUS output controlled by 4 digital inputs with a maximum muliplexing speed of 7ms per channel.
&n...
Ditel KOSMUX16A Analog Multiplexer for 16 0/4-20mA inputs and one RS485 MODBUS output controlled by 4 digital inputs with a…
Ditel KOSMUX8 Analog Multiplexer for 8 0/4-2mA inputs and one active 0/4-20mA output controlled by 3 digital inputs with a maximum multiplexing speed of 7ms per channel.
&n...
Ditel KOSMUX8 Analog Multiplexer for 8 0/4-2mA inputs and one active 0/4-20mA output controlled by 3 digital inputs with a…
The KOSUSB unit provides a fully input/output isolated USB powered interface between a Windows computer and "DITEL KOS" line of loop configurable temperature transmitters.
...
The KOSUSB unit provides a fully input/output isolated USB powered interface between a Windows computer and "DITEL KOS" line of loop…
Ditel Mounting Device on DIN rail for KOS series ACK103 Installation Kit on DIN RAIL for in-head converters. The kit ACK103 (KOS Converters) Includes: A. 1 M4 screws to secu...
The P17 Transducer is designed to convert the signal from temperature, resistance or voltage sensors into a 4...20mA current signal.…
The P17G Passive separator in a housing of 6.2mm width, serves for the electric isolation and filtration of the 0/4...20mA standard signal value without an additional supply v...
The P17G Passive separator in a housing of 6.2mm width, serves for the electric isolation and filtration of the 0/4...20mA…
The P20 Programmable transducer is designed to convert the temperature resistance, voltage from shunt and standard signals into a standard constant current or contact voltage ...
The P20G Separator assures full galvanic isolation of the input, output and auxiliary supply and matching of analogue signals in…
The P20H Transducer are applied for the continuous conversions of d.c. voltage and d.c. current into a standard d.c. current, d.c. voltage signal or RS485 digital signal.
&...
The P20H Transducer are applied for the continuous conversions of d.c. voltage and d.c. current into a standard d.c. current,…
P20Z Transducer is designed to a continuous conversion of the rms current value or alternating voltage without the constant component into a standard DC current or DC voltage ...
P20Z Transducer is designed to a continuous conversion of the rms current value or alternating voltage without the constant component…
The P21Z Transducer is designed for a continuous conversion of a.c. current or a.c. voltage without the constant component or frequency into a standard d.c. current or d.c. vo...
The P21Z Transducer is designed for a continuous conversion of a.c. current or a.c. voltage without the constant component or…
The P30H transducer is designed for photovoltaic, battery, telecommunications and railway installations. P30H measures and records current, voltage, power, energy and other d....
The P30H transducer is designed for photovoltaic, battery, telecommunications and railway installations. P30H measures and records current, voltage, power, energy…
The P30O Programmable transducer is designed to convert the number of pulses, number of working hours, frequency, period and rotational speed into a digital or standard curren...
The P30O Programmable transducer is designed to convert the number of pulses, number of working hours, frequency, period and rotational…
The P30P is a transducer which is designed to measure 1-phase power network parameters. It can be measured and recorded up to 16 parameters.
The output signal is galvanical...
The P30P is a transducer which is designed to measure 1-phase power network parameters. It can be measured and recorded…
The P30U transducer is designed to convert temperature, resistance, standard voltage and current signals into a standard DC voltage or DC current signal. The output signal is ...
The P43 is designed for the conversion of 3-phase, 3-4 wire power network parameters, in balanced or unbalanced systems.
Lumel PD20 USB/RS485 Interface industrial converter.
The PD20 Converter does not interfere into the structure of any data transmission and is compatible with many industria...
Lumel PD20 USB/RS485 Interface industrial converter. The PD20 Converter does not interfere into the structure of any data transmission and…
Lumel PD24 converter of USB/RS232 (TTL interfaces). The PD24 converter is designed for the conversion of USB interface into RS232 (TTL) interface with TTL voltage levels. More...
Lumel PD24 converter of USB/RS232 (TTL interfaces). The PD24 converter is designed for the conversion of USB interface into RS232…
The Lumel PD51 Converter/Repeater RS485/RS232 Interface is a digital device that is designed to convert RS232 into a RS485 interface or the RS485 interface into a RS485 interf...
The Lumel PD51 Converter/Repeater RS485/RS232 Interface is a digital device that is designed to convert RS232 into a RS485 interface…
The Lumel SM1, 2-channel module with analog inputs and is designed to convert standard signals, resistance or temperature signals into numerical data accessible through the RS...
The Lumel SM1, 2-channel module with analog inputs and is designed to convert standard signals, resistance or temperature signals into…
The Lumel SM2 is a 4 channel module with Analog inputs and is designed to convert the standard signals, resistance or temperature signals into numerical data accessible throug...
