IL Series Momentary Push Button

The IL series is a range of momentary sealed push button switches perfect for installation on thick or variable thickness panels.

The push buttons diameter is 12mm long threaded bushing. Can be illuminated or non-illuminated. Designed for panels up to 10mm thick. The button has a tactile feedback. Round actuator. Gold-plated silver contacts. Sealed to IP67 (standard models only).

 

Description

APEM IL series is a range of momentary sealed push button switches perfect for installation on thick or variable thickness panels.

MAIN FEATURES of the IL Series Momentary Push Button:

  • Diameter 12mm long threaded bushing
  • Illuminated or not
  • For panels up to 10mm thick
  • Tactile feedback
  • Round actuator
  • Gold-plated silver contacts
  • Sealed to IP67 (standard models only)

Control Devices is the official APEM distributor for Australia and New Zealand. APEM offers a broad selection of quality products with proven effectiveness in harsh environments. From Push buttons, Rockers, Toggles, LED indicators, Emergency Stops to Joysticks and keypads.

APEM develops and manufactures professional switch products for diversified markets including instrumentation, medical, communications, industrial automation, defence and transport. With a vertically integrated production, and controls all stages of product development and production: from tooling, moulding, screw machining to assembly and final inspection.

APEM’s dedication and experienced teams can respond to the most complex requirements. This technical expertise ensures the continuous growth of our product ranges, allowing strong partnerships with our customers and providing the necessary flexibility to create an infinite number of products.

APEM offers a range of more than 50,000 customisable part numbers: colour, marking, finish, shape and dimensions… unlimited combinations are possible. This variety of components allows them to create the unique combination to match your design. Custom colours, specific materials, special backlighting or varied shapes are available upon request. Particular attention is paid to the cosmetic appearances of our products to best match your requirements, from specific markings to brightness illumination for outdoor applications.

By controlling all phases of manufacturing and quality control, APEM products offer the ability to withstand the adverse elements associated with harsh environments, without affecting their life expectancy.

See all APEM Products

Follow us on Facebook

 

• Max. current/voltage rating with resistive load: 2 A 24 VDC, 200,000 cycles
• Initial contact resistance: 50 mΩ max.
• Insulation resistance: 1 GΩ min. at 500 VDC
• Dielectric strength: 1,000 Vrms

• Panel thickness: 1.50 mm (.059) min. 10 mm (.393) max.
• Total travel: 1.7 mm (.067) +/- 0.3 mm
• Typical operating force: 4 N +/- 2 N
• Low level or mechanical life: 1,000,000 cycles
• Torque (applied to nut): 1 Nm max. with metal nut U166 1.5 Nm max. with plastic nut U4248
• Soldering: 300 °C max. for 3 seconds

ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing according to IEC 60529: IP67 (standard models) IP54 (options X1242 and 234)
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500 Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Operating temperature: -40 °C to +85 °C (-40°F to 185°F)

ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load: 2 A 24 VDC, 200,000 cycles
• Initial contact resistance: 50 mΩ max.
• Insulation resistance: 1 GΩ min. at 500 VDC
• Dielectric strength: 1,000 Vrms

MATERIALS
• Case: thermoplastic UL94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: polyamide 6/6
• Contacts: silver, gold plated
• Terminal seal: epoxy