Pica100-P Digital Panel Meter

Ditel Pica100-P and Pica100-P6 Digital panel meter is 48 x 24mm (1/32 DIN) and it is a fully programmable meter, easy to scale into the required engineering units by using the front keys or rear input signal value in teach mode (tEAc) with 4 x 8mm high end red LEF digits, supply excitation for the transducer and TARE function incorporated. It is designed for measuring ±10V and ±20mA process signals

It also provides up to ±60V DC voltage input and up to ±100mV DC shunt input which allows high current signal measurement.

A multi-point scaling is also possible to define a linearisation by segments to control the volume of irregular shaped tanks.

It provides two relays that allow this instrument to not only measure but also be capable of controlling, regulating and detecting alarms for the mentioned signals.

The indicator incorporates three keys located on the bottom of the frontal display to set all configuration parameters. 4-level brightness configuration is possible to adapt it to the light working conditions. Registers the minimum and maximum process values since since its starting up or a resetting.

  • Pica100-P: Power supply 85 – 265 VAC
  • Pica100-P6 Power supply 10, 5-70 VDC

 

Description

Ditel Pica100-P and Pica100-P6 Digital panel meter is 48 x 24mm (1/32 DIN) and it is a fully programmable meter, easy to scale into the required engineering units by using the front keys or rear input signal value in teach mode (tEAc) with 4 x 8mm high end red LEF digits, supply excitation for the transducer and TARE function incorporated. It is designed for measuring ±10V and ±20mA process signals

It also provides up to ±60V DC voltage input and up to ±100mV DC shunt input which allows high current signal measurement.

A multi-point scaling is also possible to define a linearisation by segments to control the volume of irregular shaped tanks.

It provides two relays that allow this instrument to not only measure but also be capable of controlling, regulating and detecting alarms for the mentioned signals.

The indicator incorporates three keys located on the bottom of the frontal display to set all configuration parameters. 4-level brightness configuration is possible to adapt it to the light working conditions. Registers the minimum and maximum process values since since its starting up or a resetting.

  • Pica100-P: Power supply 85 – 265 VAC
  • Pica100-P6 Power supply 10, 5-70 VDC

DITEL has the widest range of Digital Panel Meters for the monitoring and control of industrial processes. DITEL has also a very complete range of Large Displays that offer a high number of possibilities in terms of visualisation and communication:
Several heights of digits allowing long viewing distances, most common communication protocols available, adaptability to many kind of environmental conditions, numeric and alphanumeric contents,..etc. All these with a view to help your company improving such important matters as productivity, Focus on goals and objectives, Results achievements, Security, etc…

Since its creation in 1984 DITEL has concentrated on the development and manufacture of digital instruments that integrate systematically the highest technology while increasing continuously their flexibility and adaptability to virtually all industrial and service applications. This resolutely innovative approach, reinforced by a solid international network, is positioning DITEL as one of the favourite partner for the industry around the world.

See all Ditel Products

Follow us on Facebook

Process  

+/- 10VDC
+/- 60VDC
+/- 20mA
+/- 100mV

 

Ordering Codes

 

• Universal power supply
• Universal power supply+ANAP
• Universal power supply+RS4P
• Low voltage power supply
• Low voltage power supply+ANAP
• Low voltage power supply+RS4P

PICA100-P
PICA101-P
PICA104-P
PICA100-P6
PICA101-P6
PICA104-P6

PICA100 P

PICA100 P